logo3.GIF (4256 bytes)              Products

Laminar Jet-Flow Pass-Thru
PTJF Series
blank.gif (60 bytes)blank.gif (60 bytes)
prod2.5.gif (1965 bytes)
blank.gif (60 bytes)

AIR CRAFTERS, INC. proudly introduces its PTJF (Laminar Jet-Flow Pass-Thru System).  This innovative new product has been developed through careful analysis of customer needs for material decontamination prior to clean area introduction.  Its rugged stainless steel construction protects against wear in high traffic applications, permits total sterilization and easy cleaning, as well as providing long lasting aesthetic appeal.  Our proprietary OPPOSED AIR JET SYSTEM ensures particulate capture during timed wash cycle by creating high velocity parallel air streams within the chamber. 

This cycle is sensor activated and time adjustable from 0-180 seconds.  Engineered to assure balanced recirculation, neutral pressurization is achieved within chamber  during cycle, insuring against particulate migration into clean room.  Raised intake jet orifices in Pass-Thru floor prevent seepage in the event of spills.  Coved corners allow for easy wipe-down and cleanability.  This product is also available in low-wall return, base discharge and continuous laminar flow recirculating models.  We believe that this unique product provides the best insurance against contaminated material introduction into your clean space.

Thank you for considering AIR CRAFTERS for your airborne contamination control needs.
blank.gif (60 bytes)
shade.gif (2120 bytes)
blank.gif (60 bytes)

STANDARD FEATURES

  • Solid 18 ga. 304 stainless steel construction with a #4 brushed finish.
  • Mechanical interlocking door system: LEVER-LOCK.
  • Coved interior corners.
  • 3/8" thick acrylic doors.
  • Continuous compression/bulb gasket.
  • HEPA filtration  rated 99.99% efficient @0.3 microns.
  • High velocity OPPOSED AIR JET SYSTEM.
  • Sensor activated cycle w/adjustable timer.
  • 24v control circuit.
  • Cycle activation warning light.blank.gif (60 bytes)

OPTIONAL FEATURES

  • Polyurethane coated 18 ga. CRS construction with stainless steel floor.
  • Tinted acrylic doors.
  • 1/4" safety or tempered glass doors.
  • Low wall air return system.
  • Base discharge purge system.
  • Continuous laminar flow recirculating system.
  • Fire rated construction.
  • Finish trim kit.
  • Support gussets for cantilever mounting.
  • ULPA filtration 99.9995% efficient @0.12 microns.
shade.gif (2120 bytes)
blank.gif (60 bytes)

blank.gif (60 bytes)
NOTES:

  • AIR CRAFTERS inspection reports available upon request.
  • Optional trim kits are recommended for all installations.
  • All filters are PSL challenged at factory.  Certificates of conformance are available upon request.
  • All electrical components are UL listed.
  • All electrical wiring is in conformance w/NEMA standards.
  • Approval drawings available upon request.
blank.gif (60 bytes)
MODEL OUTSIDE DIM
H x W x D		 INSIDE DIM
H x W x D		 ELECTRICAL TRIM KIT* GUSSET KIT* SHIP
WT
PTJF-22-SH 39 1/2" x 29 1/4" x 24" 24" x 24" x 24" 115V-60hz-1ph TK-04 SG-14 195  lb

*Be sure to include kit model number when ordering optional trim or gusset kit.
All shipping weights are estimated.

buttonconcepts.gif (3184 bytes)buttonproducts.gif (2668 bytes)buttonbio.gif (2719 bytes)buttonsite.gif (2753 bytes)buttoncontact.gif (2651 bytes)
 

buttonhome.gif (1894 bytes)

 

 Air Crafters, Inc.
2085 Fifth Avenue
Ronkonkoma, NY 11779
(631) 471-7788 Voice
(631) 471-9161 FAX

info@air-crafters.com
http://www.air-crafters.com
© 1998 Air Crafters, Inc., All Rights Reserved.
We welcome your feedback.