logo3.GIF (4256 bytes)              Products

Lay-in Ceiling Terminal Filter Module
CLFM Series
blank.gif (60 bytes)
prod4.2.gif (984 bytes)
blank.gif (60 bytes)

AIR CRAFTERS, INC.'s CLFM Series is a HEPA rated filtration module designed for ceiling T-grid installation. This non-motorized filter module has been developed for integration into existing facilities air delivery and supply systems, or to be utilized with AIR CRAFTERS' TSAM (Terminal Supply Air System).

Delivered complete and ready for installation, this product provides a low-cost alternative for creating clean areas while utilizing existing facilities’ air resources.Each filter is housed in a heavy gauge anodized aluminum frame with a gasket sealed aluminum inlet cover. An aerosol challenge port and adjustable damper system is located on the room side of the filter face for easy challenge introduction and air flow adjustment. The filter media is protected by an expanded steel screen (coated white) on the room side face of the filter. Manufactured to AIR CRAFTERS'  specifications, this is the finest product of its kind.

Thank you for considering AIR CRAFTERS for your airborne contamination control needs.

blank.gif (60 bytes)
shade.gif (2120 bytes)
blank.gif (60 bytes)

STANDARD FEATURES

  • HEPA filtration rated 99.99% efficient @0.3 microns.
  • Factory sealed single piece aluminum construction.
  • Light weight for ease of installation and minimum load.
  • Low profile design, only 6" overall height, with a 2" high duct collar connection.
  • 10" diameter duct collar.
  • Room side adjustable damper.
  • Room side aerosol challenge introduction port.

OPTIONAL FEATURES

  • Solid Stainless Steel construction.
  • ULPA filtration 99.9995% efficient @ 0.12 microns.
  • 12" diameter duct collars.

NOTES:

  • AIR CRAFTERS inspection reports available upon request.
  • All filters are PSL challenged at factory. Certificates of conformance are available upon request
  • Approval drawings available upon request
blank.gif (60 bytes)
MODEL UNIT DIM PERFORMANCE UNIT WT
CLFM-22-AH 23 5/8" x 23 5/8" x 6"h

400 CFM @ .55 wg

 17 LB
CLFM-24-AH 23 5/8" x 47 5/8" x 6"h 800 CFM @ .55 wg 26 LB

All catalog dimensions are nominal. All shipping weights estimated.
blank.gif (60 bytes)
buttonconcepts.gif (3184 bytes)buttonproducts.gif (2668 bytes)buttonbio.gif (2719 bytes)buttonsite.gif (2753 bytes)buttoncontact.gif (2651 bytes)
 

buttonhome.gif (1894 bytes)

 

 Air Crafters, Inc.
2085 Fifth Avenue
Ronkonkoma, NY 11779
(631) 471-7788 Voice
(631) 471-9161 FAX

info@air-crafters.com
http://www.air-crafters.com
© 1998 Air Crafters, Inc., All Rights Reserved.
We welcome your feedback.